Cross-Mix Milling Machine
Manufacturer: Stegherr
Type: KSF 2/4

with milling cutters
suitable for milling cross-mix joints in, for example, windows, doors, and furniture
equipped with 3 milling units
one upper and one lower milling unit mill the two miter-like recesses simultaneously
and a third unit mills the rabbeting at the same time
The machine table is pneumatically-hydraulically moved.
The forward and reverse speeds are adjustable.
With foot control
2 motors, each approx. 2.2 kW
Connected load approx. 4.5 kW
Compressed air 6 bar
Voltage 380 V 50 Hz
Dust extraction port diameter 180 mm